- Blade Width: 8'6" & 9'6"
- Fits: Truck Class 2-3 & Tractors
- Moldboard: Stainless or Powder-Coated Steel
TAKE IT TO THE
NEXT LEVEL
With the ability to position the plow in V, straight or scoop mode, plowing snow with the XtremeV™ v-plow takes you to the next level. Whether busting through a long driveway or clearing a parking lot full of cars, the XtremeV v-plow makes quick work of brutal winter conditions.
Unique Features
Plow Blade Construction
Available in stainless steel or powder coated steel, the XtremeV™ snow plow blade is available in 8′ 6″ and 9′ 6″ widths*. The blade comes standard with a high-carbon steel cutting edge, increasing wear resistance, and features a 70-degree attack angle for enhanced scraping and back dragging.
Structural Reinforcement
The XtremeV™ v-plow features our rugged x-bracing design which is constructed from four vertical ribs and eight x-bracing ribs. The ribs reinforce the blade for structural integrity and exceptional torsional strength, even under the punishing stress of commercial plowing. T-frame design provides added strength and allows blade-pitch adjustment to reduce uneven cutting edge wear.
Double-Acting Cylinders
InstaLock double-acting cylinders allow the operator to lock the wings together to use the v-plow in straight blade mode with single button control. Double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.
Center Snow Control
For exceptional snow containment in all positions, the XtremeV™ v-plow has a center deflector designed to prevent snow from going over the top of the blade and the formed cutting edges reduce trailing snow.
Tractor Compatible Mount
Designed for easy installation onto a wide range of tractor models, these mount kits make it possible for the XtremeV™ v-plows to fit on a compact tractor. They are flared both vertically and horizontally to ensure proper alignment and make the drive-in connection easier. The push beam, which makes up the front portion of the mount, can be quickly detached to allow for a loader attachment.
*XV2 featured in image.
Learn More
Standard Plow Features
Showing 3 out of 11
INTENSIFIRE™ Snow Plow Headlights
Available in both LED and Dual-Halogen models, INTENSIFIRE™ plow headlights are engineered and tested for maximum light output, performance, and durability to keep you ahead of the next storm.
LED Headlights
Dual-Halogen Headlights
Minute Mount® 2 Snow Plow Mounting System
The FISHER Minute Mount® 2 system has been engineered for superior safety, durability, and convenience. The mechanical nature of its design means that there are no sensitive electronics that could fail and prevent you from attaching or removing your plow.
Watch Video
Trip-Edge Protection
Each v-plow blade features independent trip-edge protection to get over bumps and hidden obstacles, whether in V, scoop, or straight-blade configuration, helping to protect the plow, the truck and the operator. Since only the bottom edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow.
The FISHER® trip-edge uses compression-type springs that never require adjustment and will not wear out like extension springs.
Watch Video
Reliable Hydraulics
We design and manufacture our own hydraulics to ensure the highest standards of performance, quality, and durability—giving you a plow that is fast, responsive, and built to last. This allows plow drivers to change the blade position quickly and easily for efficient plowing. All critical hydraulic components are fully enclosed for protection from the elements.
Watch Video
Chain Lift Design
The FISHER® chain lift design offers a wide range of performance and reliability advantages over a direct lift system.
Watch Video
FLEET FLEX Electrical System
The FLEET FLEX Electrical System minimizes intrusion to your vehicle during installation and also provide simple, reliable connections between your vehicle and plow. It's completely universal to all current FISHER snowplows so that plow fleets are able to optimize their operations and use any plow on any vehicle for true fleet interchangeability.
Learn More
SECURITY GUARD™ Anti-Theft System
The exclusive SECURITY GUARD anti-theft system is a safe and secure way to electronically lock your snow plow whenever it is detached from your truck.
Watch Video
STORM GUARD™ Baked-On Powder Coat
The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows.
Watch Video
Universal Plow Control Options
Choose between the ergonomic Fish-Stik® hand-held control or the dash-mounted joystick control. Both feature automatic shutoff, backlit buttons for night operation, and LED lights which indicate "power" and "float" mode. Additional features include programmable "soft-stop", "one-touch" float, build in SECURITY GUARD™ anti-theft system and a plug-in connector for easy removal.Both controls have a plug-in connector for easy removal.
Isolation Module
An underhood module transfers lights from vehicle to plow automatically and improves system reliability by using plug 'n play, sealed electrical connections that comply with OEM requirements. Isolating the plow's electrical system from the vehicle's prevents the potential of electrical system damage in the event of a shorted circuit.
Pre-Punched Blades for Accessories
The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.
Featured Accessories
BACK DRAG EDGE KIT
Achieve cleaner results and increased efficiency with a genuine back drag edge from FISHER®. Made from 1/4 inch abrasion-resistant steel and custom fit to your blade, this back drag edge will improve results by providing a clean scrape while back dragging.
* Cannot use Back Drag Edge and Shoe Kit simultaneously.
Part Number
#44282-3
For 8' 6" Models
#44283-4
For 9' 6" Models
CURB GUARDS - CAST IRON
Curbing can seemingly come out of nowhere sometimes; protect your blade with a pair of genuine curb guards from FISHER®. These simple-to-install curb guards are made of cast iron for ultimate wear-resistance, and also feature a rounded profile which reduces damage to curbing as well as the blade.
* Cannot use Curb Guards and Wing Extensions simultaneously.
Part Number
#44406
For All Models
BLADE ANGLE STOPS
Beef up your blade and prepare for extreme plowing conditions with genuine FISHER® Blade Angle Stops, designed to transfer extreme impacts throughout the blade’s structure and reduce stress on the hydraulic rams. This kit comes with all of the necessary hardware and instructions for easy installation.
Part Number
#44473
For All Models
View All Accessories
Product Specifications
Metric
Models | 8'6" | 9'6" |
---|---|---|
Moldboard Options | Stainless or Powder-Coated Steel | Stainless or Powder-Coated Steel |
Moldboard Options | Stainless or Powder-Coated Steel | Stainless or Powder-Coated Steel |
Blade Type | V-Plow | V-Plow |
Blade Type | V-Plow | V-Plow |
Vehicle Compatibility | Truck Class 2-3 & Tractors | Truck Class 2-3 & Tractors |
Vehicle Compatibility | Truck Class 2-3 & Tractors | Truck Class 2-3 & Tractors |
Approx. Weight* (Without Mount) | 876 lbs | 984 lbs |
Approx. Weight* (Without Mount) | 397 kg | 446 kg |
Plowing Width (Full Angle) | Full Angle: 7'5" Scoop: 7'1" Full V: 7'7" | Full Angle: 8'3" Scoop: 7'11" Full V: 8'7" |
Plowing Width (Full Angle) | Full Angle: 2.26 m Scoop: 2.16 m Full V: 2.31 m | Full Angle: 2.51 m Scoop: 2.41 m Full V: 2.62 m |
Blade Width | 8'6" | 9'6" |
Blade Width | 2.59 m | 2.90 m |
Blade Height | At Center: 29" At End: 31" | At Center: 31" At End: 33" |
Blade Height | At Center: 73.66 cm At End: 78.74 cm | At Center: 78.74 cm At End: 83.82 cm |
Blade Gauge | 14 ga | 14 ga |
Blade Gauge | 2.66 mm | 2.66 mm |
Trip Springs | 4 | 6 |
Trip Springs | 4 | 6 |
Ribs | 12 | 12 |
Ribs | 12 | 12 |
Lift Cylinder | 1½" x 10" | 1½" x 10" |
Lift Cylinder | 3.81 cm x 25.40 cm | 3.81 cm x 25.40 cm |
Angling Rams | 1¾" x 11" | 1¾" x 11" |
Angling Rams | 4.45 cm x 27.94 cm | 4.45 cm x 27.94 cm |
Cutting Edge | ⅜" x 6" (Standard) | ½" x 6" (Standard) |
Cutting Edge | 0.95 cm x 15.24 cm (Standard) | 1.27 cm x 15.24 cm (Standard) |
Mount Type | Minute Mount® 2 | Minute Mount® 2 |
Mount Type | Minute Mount® 2 | Minute Mount® 2 |
* Does not include vehicle mount (approx. 60 lbs for v-plows). Please refer to the eMatch program for specific vehicle applications.
Compare Products
Product Literature
eMatch
Does this plow fit my vehicle?
Use eMatch & enter your vehicle’s specifications to easily identify which Fisher snow plows will fit your vehicle.
Get Started
XtremeV™ Photo Gallery
View Full Gallery
XtremeV™ Video Gallery
View Full Gallery