Commercial Wallpaper | Hovia (2024)

FAQs

How do you calculate commercial wallpaper? ›

Estimating Commercial Square Footage

An important formula to remember is: Width divided by 12 = number of feet. Number of feet multiplied by 3 (1 yard) = square feet/width (square feet per lineal yard)

Commercial wallpaper is a chic and a more durable solution for commercial spaces such as restaurants, hospitality facilities, healthcare facilities, business offices, beauty salons and more, as it is slightly thicker than residential wallpaper, more durable against scratches and dents and has fire and other ...

Commercial wallpaper is split up into two categories: Type I and Type II. Both are made for commercial spaces but Type II is more durable and scratch resistant. If you really tried, you could tear a piece of Type I wallpaper with your hands but you couldn't do that with a Type II.

A standard roll of wallpaper gives you about 35 square feet, but waste and pattern matching usually take this down to about 27 usable square feet per roll. Knowing exactly how much wallpaper you will need will help you pinpoint the potential cost and organize your budget.

The measurement process for wallpaper installation may seem intricate at first glance but we are breaking it down into simple steps below. Simply calculate your square footage using inches. Height (inches) x Width (inches) = Total Inches Total Inches / 144 = Total Square Footage.

Total drops x height + Total pattern repeat value

Divide this number by the roll length of 1000 cm (10 Metres) to work out how many rolls you need. Round up to the next whole number for the number of required rolls.

With the proper prep, you can paint over almost any kind of wallpaper. The only thing to consider is the condition of the wallpaper. If there are any chips, holes or noticeable scratches in the wallpaper, it's better to strip the wall instead of painting over the wallpaper.

If the wall is in a bad condition, a thicker 2000 grade lining paper will be required to help cover pitting and more noticeable plastering imperfections. If you're not sure which grade to use, we recommend the 1400 option as it is thick enough to cover imperfections and block staining.

It's made to cover larger areas and produce less seams. Therefore, manufacturers make commercial wallpaper 54 inches wide. This is double the width of sheet of wallpaper (covering 2x the area).

A level 5 finish is a skim coat of joint compound (also known as mud) applied to a finish that you would normally leave at level 4. You need a level 5 coating when the finish will have glossy, enamel, or non-textured flat paint or when the light will be angled low enough to highlight bumps and depressions.

What makes wallpaper expensive? ›

Custom paper and murals may be more expensive than typical solid sheet vinyl or coated fabric paper. Grass woven wallpaper is much more expensive than vinyl because it's made from natural materials and hand-woven.

There are some historic with wallpaper that has lasted over 100 years! But what kind of wallpaper is the right choice? The answer might surprise you. If you are looking for a long lasting and durable option, the clear winner is solid vinyl wallpaper.

Divide the total square feet of wall space by 27 to determine the number of rolls required. The formula is: Square footage ÷ by 27 = Number of rolls. At this point, you could subtract 21 square feet for any doors and 15 square feet for each window.

54-inch wide material used to cover 1500 square feet is figured. 54 divided by 12 = 4.5. 4.5 multiplied by 3 = 13.5 square feet per linear yard.

To measure commercial square footage for a rectangular space, multiply the length of the room in feet by its width. For example, a room that is 12 feet long by 12 feet wide is 144 square feet.

Professional wallpaper installation costs $4 to $10 per square foot or $400 to $1,000 total on average for a 12'x8' wall. Wallpaper costs $20 to $50 per roll for the material. The labor cost to install wallpaper is $3 to $7 per square foot or $30 to $50 per roll.